LIQUID CLEANERS

LIQUID CLEANERS

LIQUID CLEANERS

LIQUID CLEANERS


SunVisto Power Scrub
Used to clean aqueous based flexographic UV or conventional inks
Application: With a rag/sponge or with a sprayer
Directions: Apply with a foaming applicator straight or diluted up to 8:1 with water. Repeat if needed.

SunVisto Anilox Renew
Used to clean aqueous based flexographic UV or conventional inks
Application: With a sprayer/wand
Directions: Apply with a foaming applicator straight or diluted up to 4:1 with water. Repeat if needed.
SunVisto Anilox Renew

SunClean V3-25 Ink Cleaner
Used to clean solvent based, UV and cross-linked flexographic inks
Application: With a sprayer or direct from the container
Directions: Apply undiluted to roller to sit for 2-3 minutes, then scrub with a rag/sponge. Wipe with a damp rag once finished.
SunClean V3-25 Ink Cleaner
Packaging:
- Quart Bottles
- 5 Gallon Pails
- 55 Gallon Drums
- 275 Gallon Totes
LIQUID CLEANERS



Ceramic Anilox Roll Plugged with Acrylic Coating with Wood Finish Before & After Laser Cleaning


Ceramic Anilox Roll Plugged with Adhesive Before & After Laser Cleaning


Chrome Anilox Roll Plugged with Nylon-based Epoxy Before & After Laser Cleaning
LIQUID CLEANERS
request a quote
Ink and Adhesive Removers
All of our products are environmentally friendly and non-hazardous. Please use the tabs below to help you choose the right cleaning solution for your application.
ARCS is a proud Sun Chemical Distributor!
In addition to our below lineup of wash up chemistries for your pressroom needs, ARCS now offers cleaning solutions from Sun Chemical! Click here to learn more about these exciting new products!
The following products are suitable for your manual and “rub & scrub” applications. All of our products are eco-friendly and user-safe. Click on the product name to learn more about each product. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums.
Aqueous Cleaners
ARCS-105 – A budget friendly, very eco-friendly, low VOC water-based ink remover safe for all press parts and general cleaning.
When liquid cleaners are used during the press wash up cycle, everything that your ink touches gets cleaned as well – including ink pumps, chamber assemblies and doctor blades. The below aqueous-based products are suitable for this application and will not harm your soft metals or anilox rolls. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums. Click below for more detailed information on each product.
Aqueous Cleaners
ARCS-105 – A budget friendly, low VOC water-based ink remover safe for all press parts and general cleaning.)
The following products are designed to perform in your ultra sonic cleaner. Click on the product name to learn more about each product. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums.
Aqueous-Based Cleaners
ARCS-105 – A budget friendly, very eco-friendly, low VOC water-based ink remover safe for all press parts and general cleaning.
The following products are suitable for use with your spray-on chemical washer system (i.e. Flexowash). Click on the product name to learn more about each product and how they can best work for you. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums.
Aqueous-Based Cleaners
ARCS-105 – A budget friendly, very eco-friendly, low VOC water-based ink remover safe for all press parts and general cleaning.
The following products are suitable for your manual and “rub & scrub” applications. All of our products are eco-friendly and user-safe. Click on the product name to learn more about each product. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums.
Aqueous Cleaners
ARCS-105 – A budget friendly, very eco-friendly, low VOC water-based ink remover safe for all press parts and general cleaning.
Optima 2000FG – An NSF certified food grade aqueous cleaner engineered for removing all types of inks and serves as a degreaser and multi-purpose cleaner. (Also available in disposable wipes.)
Anilox SC – A supercharged aqueous deep cleaner for your water-based and UV cured inks and adhesives. (Also available in disposable wipes.)
Solvent-Based Cleaners
Ink Blaster OS – Solvent-base cleaner designed especially for the off-set market to remove oil and solvent based inks, adhesives and lacquers. (Also available in disposable wipes.)
FRP Ultra – Resin Remover – An organic solvent based multi-purpose cleaner for use on ALL types of inks and adhesives. (Also available in disposable wipes.)
D-Bond Adhesive Remover – A mixture of environmentally safe organic solvents designed to remove “tough” glues and adhesives from all types of parts.
When liquid cleaners are used during the press wash up cycle, everything that your ink touches gets cleaned as well – including ink pumps, chamber assemblies and doctor blades. The below aqueous-based products are suitable for this application and will not harm your soft metals or anilox rolls. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums. Click below for more detailed information on each product.
Aqueous Cleaners
ARCS-105 – A budget friendly, low VOC water-based ink remover safe for all press parts and general cleaning.)
Optima 2000FG – An NSF certified food grade aqueous cleaner engineered for removing all types of inks and serves as a degreaser and multi-purpose cleaner. (Also available in disposable wipes.)
Anilox SC – A supercharged aqueous deep cleaner for your water-based and UV cured inks and adhesives. (Also available in disposable wipes.)
The following products are designed to perform in your ultra sonic cleaner. Click on the product name to learn more about each product. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums.
Aqueous-Based Cleaners
ARCS-105 – A budget friendly, very eco-friendly, low VOC water-based ink remover safe for all press parts and general cleaning.
Optima 2000FG – An NSF certified food grade aqueous cleaner engineered for removing all types of inks and serves as a degreaser and multi-purpose cleaner. (Also available in disposable wipes.)
Anilox SC – A supercharged aqueous deep cleaner for your water-based and UV cured inks and adhesives.
Solvent-Based Cleaners
Ink Blaster OS – Solvent-base cleaner designed especially for the off-set market to remove oil and solvent based inks, adhesives and lacquers.
FRP Ultra – Resin Remover – An organic solvent based multi-purpose cleaner for use on ALL types of inks and adhesives.
D-Bond Adhesive Remover – A mixture of environmentally safe organic solvents designed to remove “tough” glues and adhesives from all types of parts.
The following products are suitable for use with your spray-on chemical washer system (i.e. Flexowash). Click on the product name to learn more about each product and how they can best work for you. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums.
Aqueous-Based Cleaners
ARCS-105 – A budget friendly, very eco-friendly, low VOC water-based ink remover safe for all press parts and general cleaning.
Optima 2000FG – An NSF certified food grade aqueous cleaner engineered for removing all types of inks and serves as a degreaser and multi-purpose cleaner. (Also available in disposable wipes.)
Anilox SC – A supercharged aqueous deep cleaner for your water-based and UV cured inks and adhesives.
Solvent-Based Cleaners
Ink Blaster OS – Solvent-base cleaner designed especially for the off-set market to remove oil and solvent based inks, adhesives and lacquers.
FRP Ultra – Resin Remover – An organic solvent based multi-purpose cleaner for use on ALL types of inks and adhesives.
D-Bond Adhesive Remover – A mixture of environmentally safe organic solvents designed to remove tough glues and adhesives from all types of parts.
The following products are formulated to perform in your parts washer or distillation system. Click on the product name to learn more about each product. Each product is available in 1 gallon pails, 5 gallon pails and 55 gallon drums.
Aqueous-Based Cleaners
Optima 2000FG – An NSF certified food grade aqueous cleaner engineered for removing all types of inks and serves as a degreaser and multi-purpose cleaner. (Also available in disposable wipes.)
Anilox SC – A supercharged aqueous deep cleaner for your water-based and UV cured inks and adhesives.
Solvent-Based Cleaners
Ink Blaster OS – Solvent-base cleaner designed especially for the off-set market to remove oil and solvent based inks, adhesives and lacquers.
FRP Ultra – Resin Remover – An organic solvent based multi-purpose cleaner for use on ALL types of inks and adhesives.
D-Bond Adhesive Remover – A mixture of environmentally safe organic solvents designed to remove “tough” glues and adhesives from all types of parts.